PRO-CLEAN

Test before and after mould removal

PRO-Clean is a quick and easy protein test for use before and after mould remediation.

Product information

Easy to use
Provides a quick response (5-10 minute response)
Requires no lab equipment
Tests for proteins found in mould growth
Can be used before and after mould removal for self-monitoring.

Brief product introduction

PRO-Clean is a test to determine whether egg white substances or proteins are present in a defined area. As mould contains protein, PRO-Clean can be used for self-monitoring before and after mould removal. A positive test indicates the presence of mould (or other proteins) in the tested area. A negative test indicates that there is no mould.

PRO-Clean is developed for the food industry and is a protein test, not a mould test. The test reacts to all types of protein and does not specifically test for mould. This can give a false positive result. A false positive test can indicate bacterial growth, algae growth or other protein-containing material.

PRO-Clean is particularly suitable for quick and indicative clarification of the presence of mould and for self-monitoring before and after cleaning an area with mould growth.

How to use

Take the swab out of the holster.
Swipe the cotton swab over an area of approximately 10 x 10 cm repeatedly.
Put the swab back in the holster and secure the lid
Break the pipette at the top and press the liquid into the casing
Shake gently.
The result can be read after min. 5 minutes and max. 10 minutes.

The PRO-Clean test gives a clear colour reaction after 5 minutes, which must be read within 10 minutes. after the test has been performed. Reading later than 10-15 minutes after testing may result in a risk of false colour reaction.

The ProClean test gives a clear violet colour reaction if foreign egg white substances (protein) are present in the test area. If the area is cleaned well enough, the test shows a clear, light green colour.

Watch the instructional video and PRO-Clean product data sheet for further information.

OBS!

Store in a cool place (2-25°C)
The expiry date is printed on the test pen.
Important to rinse/dry the test area thoroughly to remove dead particles before testing.