ProtoxKombi Aqua is an all-in-one product for combating wood-destroying fungi, insects and mould. The product is effective against, among other things, House Buckthorn, True House Fungus and Carpenter Fungus.
- Protects wood against attacks from wood-decaying fungi, insects and mould
- Prevents future attacks from wood-decaying fungi, insects and mould
- Prevents the spread of ongoing infestations of wood-decaying fungi and insects
- Can be used by ANYONE - professionals and consumers alike
The benefits of ProtoxKombi Aqua
ProtoxKombi Aqua saves you time and allows you to perform your tasks more efficiently. This is because the product is a combination product that performs multiple tasks in one treatment. No more treating separately for insect, fungal and mould infestations and their prevention and stopping the spread of ongoing infestations. ProtoxKombi Aqua takes on all these functions in one single treatment.
ProtoxKombi Aqua is tested and approved
ProtoxKombi Aqua has all the necessary approvals according to Danish and EU legislation. The product is tested and approved according to EN standards EN 152, EN 46 and EN 118 after ageing and leaching according to EN 84/EN73.
ProtoxKombi Aqua is approved as a wood preservative in PT8.
In Denmark with authorisation number 578-26.
In Norway with authorisation number NO-2020-0191
In Sweden with authorisation number 5622.
ProtoxKombi Aqua has MAL 00-1 and contains no solvents.
Use of ProtoxKombi Aqua
What is ProtoxKombi Aqua?
ProtoxKombi Aqua is wood protection against attacks by wood-decaying fungi (e.g. True House Fungus, Yellow carpenter sponge and white dry rot), wood-decaying insects (e.g. bark beetles and house beetles) and mould. The product is intended to protect woodwork in Use class 2 and 3. ProtoxKombi Aqua is not intended for wood in contact with the ground, such as posts and poles that are buried
Where do you use ProtoxKombi Aqua?
- Use on new and old woodwork
- May be used in Use class 2 and 3
- Do NOT use inside the vapour barrier (i.e. inside the home)
- Use on wood with a temperature above 5°C, relative humidity below 80 % and wood moisture below 18 %
Preparation
ProtoxKombi Aqua is ready to use and must not be diluted further.
Consumption is approximately 0.2 litres per m2.
The product must be stirred before use.
Always read the safety data sheet before using the product.
Application
ProtoxKombi Aqua can be applied by brush or roller.
Avoid spilling the product on the ground or in waterways.
Always carry out the treatment on a paved surface or with a cover.
After treatment
Drying time is approximately 24 hours at 23°C and a relative humidity of 60 %.
Clean tools and utensils with soap and water after use.
ProtoxKombi Aqua should be stored in a cool, frost-free place in the original packaging.
The product has a shelf life of 2 years in unopened packaging when stored correctly.
Empty packaging and residues must be delivered to the municipal hazardous waste collection centre.
For outdoor use: After treatment, the surface should be re-treated with a pigmented (opaque) coating product to protect the wood from degradation caused by the sun's UV rays and rain leaching. ProtoxKombi Aqua can be overcoated with all water-based surface products. For oil-based coatings, the treatment with ProtoxKombi Aqua must first be completely dry.
Read also
Packaging sizes
1.0 litre plastic canister
2.5 litre plastic canister
5.0 litre plastic canister
CLP Classification
Warning notice
Highly toxic with long-lasting effects on aquatic life.
Contains: 3-iodo-2-propynyl butylcarbamate3-iodoprop-2-yn-1-yl butylcarbamate, propiconazole;(+)-1-[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-ylmethyl]-1H-1,2,4-triazole, cypermethrin cis/trans +/- 40/60; α-cyano-3-phenoxybenzyl-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropane carboxylate. May cause an allergic reaction.
"Biocides must be used responsibly. Always read the labelling and product information before use."
See the entire PROTOX® product range
Find product information, labels and safety data sheets