MR10 KIT
Removes mould and discolouration
MR10 KIT effectively removes mould and discolouration in bathrooms and window sills. The kit consists of two quality products from PROTOX - HYSAN and FUGEREN GEL.
Product information
- Kit for effective mould removal in grout joints
- Effective removal of discolouration in deep grout
- Suitable for grouting in bathrooms and window sills
- One complete set - ready to use
- Do-it-yourselfers give FUGEREN a top score of 10.
Brief product introduction
MR10 KIT is a complete ready-to-use kit for easy, fast and effective removal and disinfection of mould and discolouration in depth. The MR10 KIT is designed for rubber and hard joints in bathrooms and window sills.
The solution is described by DIY as ”Sensational cure for mould in grout” and gives MR10 KIT a top score of 10.
The MR10 KIT contains two quality products, MR20 (HYSAN) and MR10 KIT GEL as well as a nylon brush, caulking pen, instructions for use and rubber gloves.
MR20 (HYSAN) removes and disinfects mould to ensure mould-free joints, while the FUGEREN gel removes the last discolourations in depth to ensure a beautiful result.
Can be used by both private and professional users.
The FUGEREN kit contains:
The FUGER set includes the following:
- HYSAN (500 ml)
- Nylon brush (1 piece)
- FUGEREN gel (250 ml)
- Sealant pen (1 piece)
- Instructions for use
- Rubber gloves
Cleaning grout in bathrooms is a 2-step process:
Before and after cleaning in the bathroom
Step 1:
- Vacuum surfaces with high mould growth with pollen filter (HEPA filter)
- Spray HYSAN on the joint and scrub the joints with the supplied nylon brush until all mould is loosened. Be careful not to brush the joints to pieces.
- Wipe away mould residue with a damp cloth.
- Allow the surface to dry.
Step 2:
- Carefully apply FUGEREN to the joints with a brush
- Leave the gel on overnight.
- After 8-12 hours, rinse the surface with lukewarm water or wipe with a damp cloth - and the treatment is complete!
For extensive discolouration, the treatment can be repeated.
Cleaning window sills is done in 2 steps:
before and after cleaning in window sills
Step 1:
- Vacuum surfaces with high mould growth with pollen filter (HEPA filter)
- Spray HYSAN on the joint and scrub the joints with the supplied nylon brush until all mould is loosened. Be careful not to brush the joints to pieces.
- Wipe away mould residue with a damp cloth.
- Allow the surface to dry.
Step 2:
- Fill the FUGEREN gel into the joint pen and gently apply the gel into the joints.
- Leave the gel on overnight.
- After 8-12 hours, wipe the joints with a damp cloth - and the treatment is complete!
For extensive discolouration, the treatment can be repeated.
OBS!
- Avoid dripping with FUGEREN gel as it can bleach or discolour certain surfaces.
- FUGEREN gel can damage natural stone and dark window sills. Always try the gel on a less visible area before carrying out the treatment.
- Cover with masking tape if necessary.
- Keep out of reach of children.
Related products
- HYSAN (MR20): Cleaning and disinfection of mould.
- MR60: Prevention against mould.
- MR70: Encapsulation of mould
Packaging
0.5 litre spray (HYSAN)
250 ml (FUGEREN gel)
GHS / CLP classification
HYSAN (MR20)
Develops toxic gas on contact with acid. Safety data sheet available on request.
Contains: Water, Sodium Chlorite, Laurylamine Dipropylenediamine and stabilising buffer.
GHS / CLP classification
FUGEREN gel
‘Use biocides safely. Always read the label and product information before use.’
See the entire PROTOX® product range
Find product information, labels and safety data sheets