FUGEREN (MR10)

FUGEREN - Mould in joints

FUGEREN effectively removes mould and discolouration in bathrooms and window sills. The kit consists of two quality products from PROTOX - HYSAN and FUGEREN GEL.

Product Information FUGEREN

  • Kit for effective mould removal in grout joints
  • Effective removal of discolouration in deep grout
  • Suitable for grouting in bathrooms and window sills
  • One complete set - ready to use
  • Do-it-yourselfers give FUGEREN a top score of 10.

A brief overview of FUGEREN

FUGEREN is a complete ready-to-use kit for easy, fast and effective removal and disinfection of mould and discolouration in depth. The FUGEREN is designed for rubber and hard joints in bathrooms and window sills.

The solution is described by DIY as ”Sensational cure for mould in grout” and gives FUGEREN a top score of 10. 

The FUGEREN contains two quality products, HYSAN and FUGEREN GEL as well as a nylon brush, caulking pen, instructions for use and rubber gloves.

HYSAN removes and disinfects mould to ensure mould-free joints, while the FUGEREN gel removes the last discolourations in depth to ensure a beautiful result.

Can be used by both private and professional users.

The FUGEREN kit contains:

The FUGEREN set includes the following:

  1. HYSAN (500 ml)
  2. Nylon brush (1 piece)
  3. FUGEREN gel (250 ml)
  4. Sealant pen (1 piece)
  5. Instructions for use
  6. Rubber gloves

Cleaning grout in bathrooms is a 2-step process:


Before and after cleaning in the bathroom
Step 1:

  1. Vacuum surfaces with high mould growth with pollen filter (HEPA filter)
  2. Spray HYSAN on the joint and scrub the joints with the supplied nylon brush until all mould is loosened. Be careful not to brush the joints to pieces.
  3. Wipe away mould residue with a damp cloth.
  4. Allow the surface to dry.

Step 2:

  1. Carefully apply FUGEREN to the joints with a brush
  2. Leave the gel on overnight.
  3. After 8-12 hours, rinse the surface with lukewarm water or wipe with a damp cloth - and the treatment is complete!

For extensive discolouration, the treatment can be repeated.

Cleaning window sills is done in 2 steps:


before and after cleaning in window sills

Step 1:

  • Vacuum surfaces with high mould growth with pollen filter (HEPA filter)
  • Spray HYSAN on the joint and scrub the joints with the supplied nylon brush until all mould is loosened. Be careful not to brush the joints to pieces.
  • Wipe away mould residue with a damp cloth.
  • Allow the surface to dry.

Step 2:

  • Fill the FUGEREN gel into the joint pen and gently apply the gel into the joints.
  • Leave the gel on overnight.
  • After 8-12 hours, wipe the joints with a damp cloth - and the treatment is complete!

For extensive discolouration, the treatment can be repeated.

OBS!

  • Avoid dripping with FUGEREN gel as it can bleach or discolour certain surfaces.
  • FUGEREN gel can damage natural stone and dark window sills. Always try the gel on a less visible area before carrying out the treatment.
  • Cover with masking tape if necessary.
  • Keep out of reach of children.

Related products

Packaging

0.5 litre spray (HYSAN)
250 ml (FUGEREN gel)

GHS / CLP classification

HYSAN (MR20)
Develops toxic gas on contact with acid. Safety data sheet available on request.

Contains: Water, Sodium Chlorite, Laurylamine Dipropylenediamine and stabilising buffer.

GHS / CLP classification

FUGEREN gel

Danger
Causes severe skin burns and eye damage. Very toxic with long lasting effects on aquatic life. Develops toxic gas on contact with acids. If medical advice is needed, bring the container or label with you. Keep out of reach of children. Do not breathe vapour/mist. Wear face protection/protective gloves/protective clothing. IF ON SKIN (or hair): Take off/remove contaminated clothing immediately. Rinse skin with water. IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if this can be done easily. Continue rinsing. Dispose of contents/container in accordance with local regulations.

Contains: sodium hypochlorite, potassium hydroxide and N,N-dimethyltetradecylamine N-oxide

‘Use biocides safely. Always read the label and product information before use.’

See the entire PROTOX® product range

Find product information, labels and safety data sheets