ProtoxMold

ProtoxMold is a colorless and water-based primer that keeps surfaces free from mold infestation.

Prevents mold growth and discoloration on porous surfaces such as damp wood, plaster, concrete, eternit boards, masonry and wallpaper
Prevents and fights discoloration outdoors e.g. on wood, wooden decks and tiles
Suitable for preventing mold growth on thermal bridges, damp building materials and building parts that sometimes get wet
Easy to use
Can be used by ANYONE - professionals and consumers alike

The benefits of ProtoxSkimmel

With ProtoxMold, you can prevent any mold attack on porous surfaces both indoors and outdoors. One of the great advantages of the product is its effect on surfaces that get wet from time to time, on thermal bridges in the home and on damp building materials. We're thinking in particular of roof trusses and roof veneer in roof spaces with poor ventilation and condensation due to undercooling and poorly insulated external walls. This is where mold grows particularly well, but with ProtoxMold you can protect the surfaces and avoid mold.

ProtoxMold also prevents the unsightly discoloration that mold often leaves behind, even when the mold is removed. It also fights discoloration on outdoor surfaces such as wood, wooden decking and tiles, so you can remove it completely.

ProtoxSkimmel is tested and approved

ProtoxSkimmel is not classified as hazardous, harmful to health or similar. ProtoxSkimmel is included/registered in the database for building products that can be used/included in Nordic Swan Ecolabel construction. And according to a Indoor climate report made by Eurofins A/S the product does not pollute the indoor climate after use.

ProtoxSkimmel has MAL 00-1.

Application of ProtoxSkimmel

What is ProtoxSkimmel?

ProtoxMold is a primer to prevent mold and discoloration from mold. It is especially suitable for thermal bridges, damp building materials and building parts that occasionally get wet. ProtoxMold can be used both indoors and outdoors. The product has a faint acetone-like odor until dry, after which the odor disappears completely.

Where do you use ProtoxSkimmel?

Can be used both indoors and outdoors
Especially suitable for porous surfaces such as damp wood, plaster, concrete, eternit boards, masonry and wallpaper
Use at a temperature above 5°C

If the product is used on painted surfaces, gloss differences may occur. Do a small test before use.

NOTE: ProtoxMold contains a binder that can form a film after drying on non-absorbent surfaces such as glass, plastic and glazed tiles. The film can be difficult to remove so remember to cover non-suction surfaces.

Preparation

Before treating with ProtoxMold, the surface must be as clean as unaffected surfaces. If there is already discoloration and mold growth, the affected surface must therefore first be disinfected or washed down with ProtoxHysan.

ProtoxSkimmel is ready to use and must not be diluted further.

Coverage is 3-5 m² per liter, but up to 6 m² on very slightly absorbent surfaces.

The product must be stirred before use.

Always read the safety data sheet before using the product.

Application

ProtoxSkimmel can be applied by brush, spraying or dipping.

The treatment with ProtoxMold can be combined with mechanical cleaning such as ice blasting, sandblasting, milling or similar.

After treatment

Drying time is approximately 8 hours.

Clean tools and equipment with soap and water after use. If spills have dried up, you can try to remove them with primer, acetone or similar.

ProtoxSkimmel has a shelf life of at least 2 years from production date in unopened packaging and should be stored frost-free.

Leftovers and empty packaging must be delivered to the municipal waste system.

After using ProtoxSkimmel, you can treat with most surface products. However, it is the user's responsibility to test the effectiveness of the product for the specific task after treatment with ProtoxSkimmel.

After finishing outdoors, the surface should be treated with a pigmented (opaque) and water-repellent surface product to protect the wood from degradation caused by the sun's UV rays and rain leaching. The item must be completely dry before finishing. Finishing should be done within one month.

Packaging sizes

5oo ml. spray bottle
2.5 liter plastic canister
5.0 liter plastic canister

Harmful to aquatic life with long lasting effects.

Contains 3-iodo-2-propynyl butylcarbamate3-iodoprop-2-yn-1-yl butylcarbamate. May cause an allergic reaction.

"Biocides must be used responsibly. Always read the label and product information before use."