WR10

WR10

Disinfection of surfaces and movables after water damage.

WR10 is used to disinfect surfaces and movables after water damage caused by cloudbursts, prolonged rain and flooding.

Product information

  • Product for disinfecting surfaces and movables after water damage
  • Suitable for disinfection of rising sewage and contaminated surface water
  • Disinfects and neutralises bacteria.
  • Based on hydrogen peroxide, which decomposes into oxygen and water
  • Ready to use, no need to dilute.

Brief product introduction

WR10 is a disinfectant for disinfecting surfaces and movables after water damage caused by cloudbursts, prolonged rain and flooding. The product disinfects and neutralises bacteria from rising sewage and inflowing surface water.

The product is based on hydrogen peroxide, which decomposes into oxygen and water.

The product should only be used by professionals.

How to use

WR10 is applied with a garden sprayer or similar low pressure sprayer and the consumption is 0.5 litres per m2. When the product comes into contact with bacteria and other living organisms, it will foam up. Leave the product on for approximately 1 hour, after which the treated area is disinfected. No further cleaning of the area is required.

The product can be used in areas with temperatures above freezing. 

See WR10 product data sheet for more information.

OBS!

  • WR10 is ready to use and does not require further dilution.
  • WR10 can be used for disinfection on all surfaces and movables. PROTOX recommends performing a test before disinfecting delicate surfaces such as textiles.

Related products

  • HP18: Disinfection of surfaces after water damage and fire damage
  • MR40 (BIOX)Disinfection of large, horizontal concrete surfaces
  • MR20 (HYSAN): Product for cleaning and disinfecting mould and bad odours.

Packaging

5 litres

GHS / CLP classification

Not classified according to Regulation (EC) No 1272/2008 of the European Parliament and of the Council (CLP)

Contains

Active ingredient: hydrogen peroxide solution: 3.01 g/100g

‘Use biocides safely. Always read the label and product information before use.’

See the entire PROTOX® product range

Find product information, labels and safety data sheets