HP18
Disinfection (and bleaching with TURBO) of surfaces and movables after fire and water damage
HP18 is used for disinfecting surfaces and furniture after fire damage where large amounts of water have been used and after water damage caused by cloudbursts, prolonged rain and flooding.
Product information
- Product for surface disinfection of fire and water damage
- Suitable for disinfecting all types of surfaces and movables
- Disinfects and neutralises bacteria and viruses
- Based on hydrogen peroxide, which decomposes into oxygen and water
- Ready to use, no need to dilute.
Product information - Whitening with TURBO
HP18 can be used for highly effective bleaching of wood and concrete surfaces with the addition of TURBO. Using TURBO accelerates the bleaching and disinfection effect of HP18.
Brief product introduction
HP18 is a disinfectant for disinfecting surfaces after fire and water damage.
HP18 disinfects and neutralises bacteria and viruses after fire damage using large amounts of water mixed with ash, soot, sewage or organic material.
HP18 disinfects and neutralises bacteria and viruses after water damage such as rising sewage and inflowing surface water caused by cloudbursts, prolonged rain and flooding. The product is based on hydrogen peroxide.
For professional use only.
How to use
HP18 is applied with a garden sprayer or similar low pressure sprayer and the consumption is 0.5 litres per m2. When the product comes into contact with bacteria and other living organisms, it will foam up. Leave the product on for approximately 1 hour, after which the treated area is disinfected. No further cleaning of the area is required.
The product can be used in areas with temperatures above freezing.
See the HP18 product datasheet for more information.
OBS!
- HP18 is ready to use and does not require further dilution.
- HP18 can be used for disinfection on all surfaces and movables. PROTOX recommends performing a test before disinfecting delicate surfaces such as textiles.
- When bleaching surfaces, TURBO can be added to HP18. Once TURBO is added, the product must be used immediately, i.e. within 2 hours, and the mixed solution must not be stored in a closed container. Any residue should be discarded.
Related products
- WR10: Disinfection of surfaces and movables after water damage
- MR40 (BIOX): Disinfection of large, horizontal concrete surfaces
- MR20 (HYSAN): Product for cleaning and disinfecting mould and bad odours.
Packaging
5 litres
GHS / CLP classification
Danger
Causes serious eye damage. Wear face protection / protective gloves / protective clothing.
IF IN EYES: Rinse gently with water for several minutes. Remove any contact lenses if this can be done easily. Continue rinsing. Call the POISON CENTRE/doctor immediately.
Contains
Active ingredient: hydrogen peroxide solution 19 g/100g.
‘Use biocides safely. Always read the label and product information before use.’
See the entire PROTOX® product range
Find product information, labels and safety data sheets