SVAMP PRO BM

SVAMP PRO BM

Prevention of dry rot

SVAMP PRO BM is an effective product for the treatment of dry rot (Serpula lacrymans) in building materials both indoors and outdoors.

Product information

  • Effective remedy for the treatment of dry rot in building materials
  • Can be used both indoors and outdoors
  • The product is water-based
  • MAL code 00-1
  • VOC-free.

Brief product introduction

SVAMP PRO BM is used by professionals to prevent true dry rot (Serpula Larrymans) on building materials such as masonry, plaster, plasterboard and similar materials. The product is based on organic ingredients, which can make the treated surfaces more water-repellent. The product has a direct inhibiting effect on mould.

SVAMP PRO BM has MAL 00-1.

The product is for professional use only.

How to use

PROTOX SVAMP PRO BM is diluted 1:3 with water and used on surfaces that are clean, free from dust and other dirt. Always try in an inconspicuous place to test the compatibility of the product with the surface before starting the treatment, especially on natural materials to ensure that the appearance does not change. Also, previous surface treatments etc. can affect the appearance of the material after treatment.

The product is applied with a low pressure sprayer (< 10 bar), roller or brush until the surface is saturated. The product is also suitable for valve impregnation.

Remove heavily infested building materials. On masonry to be treated, knock off the plaster layer and scrape out joints to a depth of 2-3 cm.

See SVAMP PRO BM product data sheet for more information

Records for SVAMP PRO BM

SVAMP PRO BM may only be sold and used in Denmark with the following product registration number:

Denmark: 4564496

OBS!

  • SVAMP PRO BM may be used in Denmark.
  • May only be used in use classes 1, 2 and 3 according to DS/EN335-1.

Related products:

  • KOMBI PROTECT: Wood preservative for the prevention of wood-decaying fungi and insects.
  • FR30: Treatment of true mould in masonry and on building materials.
  • MR20 (HYSAN): Cleaning and disinfection of mould and bad odours.

Packaging

5 litres

GHS / CLP classification

Warning notice

Causes severe eye irritation. Harmful to aquatic life with long lasting effects. Contains 3-iodo-2-propynyl butylcarbamate, 3-iodoprop-2-yn-1-yl butylcarbamate, 1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one. May cause allergic reaction. Avoid release to the environment. Wear eye protection/protective gloves/protective clothing. Wash hands thoroughly after use. IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if this can be done easily. Continue rinsing. If eye irritation persists: Seek medical advice. Dispose of contents/container in accordance with local regulations.

Contains

3-iodo-2-propynyl butylcarbamate3-iodoprop-2-yn-1-yl butylcarbamate, 1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one

Active substance: 3-iodo-2-propynyl butylcarbamate3-iodoprop-2-yn-1-yl butylcarbamate (0.75 g/100g) 1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one (0.012 g/100g).

‘Use biocides safely. Always read the label and product information before use.’

See the entire PROTOX® product range

Find product information, labels and safety data sheets