MR80
Prevention against mould
MR80 is used for the prevention of mould growth and discolouration on large surfaces. MR80 is supplied in drums and IBC containers for industrial use, e.g. wind turbine foundations, production halls and warehouses.
Product information
- Prevents and inhibits mould growth
- Prevents discolouration caused by mould
- Water-based and milky white
- Easy to apply with brush or sprayer
- Ready to use. Coverage: 4-6 m² per litre.
Brief product introduction
MR80 is used to prevent growth and discolouration caused by mould on all hard, water-resistant surfaces.
For professional use only.
MR80 has been tested in accordance with EN standard 15457.
How to use
If discolouration and mould growth have already occurred, the affected surface should be cleaned using MR20, optionally combined with mechanical cleaning, before treatment with MR80.
If MR80 is used outdoors, the surface must be post-treated with a surface coating within one month after drying.
MR80 is applied by spray, brush, roller or dipping. Do not apply at temperatures below 5°C.
Drying time is approx. 8 hours at 20°C on absorbent materials. Less absorbent materials and lower temperatures will result in longer drying times. Ensure adequate ventilation.
Coverage: 4–6 m² per litre.
OBS!
- MR80 contains a binder.
- Remember to protect non-absorbent surfaces.
- Application on surfaces such as glass, plastic, glazed tiles or similar may result in film formation, which can be difficult to remove after drying.
Packaging
200 litres
1000 litres
GHS / CLP classification
Harmful to aquatic life with long lasting effects. May cause an allergic reaction.
Contains
3-iodoprop-2-yn-1-yl butylcarbamate.
‘Use biocides safely. Always read the label and product information before use.’
See the entire PROTOX® product range
Find product information, labels and safety data sheets