FR30

FR30

Protection of building materials (PT10)

FR30 is used for the control and prevention of dry rot in masonry and on building materials.

Product information

  • Protection of building materials (PT10)
  • Fights real mould in masonry
  • Fights real dry rot in building materials such as natural stone, brick and concrete
  • Can be used to prevent infestations of true house fungus
  • For indoor use only.

Brief product introduction

FR30 is intended for indoor use for the control and prevention of real house mould. FR30 can be used on building materials such as masonry, natural stone, brick, concrete etc. FR30 is a concentrate that must be diluted with water before use.

FR30 has MAL 00-4.

The product is for professional use only.

How to use

FR30 can be applied by brush, roller, spraying (< 6 bar), injection or foam application.

Use 360-625 ml of application solution per m2.

FR30 is used on surfaces that are clean, free of dust and other dirt. Always do a test in an inconspicuous place before starting the treatment - especially on natural materials - to ensure that the product is compatible with the surface. Previous surface treatments may affect the appearance of the building material after treatment.

See FR30 product data sheet for more information

Records for FR30

The FR30 may only be sold and used in Denmark and Norway with the following product registration numbers:

Denmark: 4601058
Norway: 673412

OBS!

  • FR30 can be used in Denmark.
  • FR30 is a concentrate that must be diluted with water before use.

Related products

  • KOMBI PROTECT: Wood preservative for the prevention of wood-decaying fungi and insects
  • SVAMP PRO BM: Treatment of dry rot in building materials
  • MR20 (HYSAN): Product for cleaning and disinfecting mould and bad odours

Packaging

5 litres

GHS / CLP classification

Danger

Causes severe skin burns and eye damage. Very toxic with long lasting effects on aquatic life. Do not breathe vapour/mist. Avoid release to the environment. Wear eye protection / protective gloves / protective clothing. IF ON SKIN (or hair): Take off/remove contaminated clothing immediately. Rinse or shower skin with water. IF IN EYES: Rinse gently with water for several minutes. Remove any contact lenses if this can be done easily. Continue rinsing. Dispose of contents/container in accordance with local regulations.

The product contains low boiling liquids that absorb poorly on carbon filters. If a respirator is used, it must be self-contained breathing apparatus.

Danger

Poly(oxy-1,2-ethanediyl), α-[2-(dide- cylmethylammonio)ethyl]- .omega.- hydroxy-, propanoate (salt) (Bardap 26), Amines, C12-14 (even numbered)-alkyldimethyl, N-oxides

Active ingredient: Poly(oxy-1,2-ethanediyl), α-[2-(dide- cylmethylammonio)ethyl]- .omega.- hydroxy-, propanoate (salt) (Bardap 26) (18.2 g/100g)

‘Use biocides safely. Always read the label and product information before use.’

See the entire PROTOX® product range

Find product information, labels and safety data sheets