ProtoxAkvagrund2 is a wood preservative for first-time treatment of new and old outdoor woodwork that needs protection against rot, fungus and blue stain.
- Prevents rot, fungus, blue stain and mold
- Seals mold infestations in inaccessible places such as roof structures, inside wall structures and under raised floors
- Can be used on untreated outdoor woodwork - new and old - such as windows, doors, wooden decks, fences and carports
The benefits of ProtoxAkvagrund2
One wood preservative that protects against rot, fungus, mold and blue stain while being easy to use. That's exactly what ProtoxAkvagrund2 is and can do. It saves you labor time. And ProtoxAkvagrund2 has the lowest MAL code of 00-1, so you meet the requirements of health and safety legislation to choose the least hazardous product when you choose ProtoxAkvagrund2.
If you need to treat a mold infestation in a hard-to-reach place, ProtoxAkvagrund2 is also the obvious choice. It seals mold infestations where it is not physically or economically possible to remove them with ProtoxHysan. Such inaccessible places can be:
- Roof structures with sloped walls
- Plywood underroofs in plywood
- Particleboard in wall constructions
- Plaster inside wall constructions
- Under chocked floors
- In cable ducts
ProtoxAkvagrund2 is tested and approved
ProtoxAkvagrund2 has all the necessary approvals according to Danish and EU legislation. The product has been tested against blue stain, rot and fungus and approved according to EN standards EN 84, EN 73 and EN 152.1.
ProtoxAkvagrund2 has MAL 00-1, so you meet the requirements of the Danish Working Environment Act to choose the least hazardous product when working with ProtoxAkvagrund2. The product is also not classified as hazardous, harmful or similar.
ProtoxAkvagrund2 is approved in Denmark with the number MST 578-23-1.
ProtoxAkvagrund2 is approved in Sweden with the number 4745-1-1-1.
ProtoxAkvagrund2 is approved in Norway with the number NO-2013-0028.
Application of ProtoxAkvagrund2
What is ProtoxAkvagrund2?
ProtoxAkvagrund2 is a colorless, aqueous product to protect untreated outdoor woodwork against rot, fungus, mold and blue stain. It can also seal inaccessible areas against mold growth, e.g. roof structures, inside wall structures and under blocked floors.
ProtoxAkvagrund2 is very odorless and after drying there is no odor at all.
Be aware that a surface treated with ProtoxAkvagrund2 will have reduced vapor permeability. A surface treated with ProtoxAkvagrund2 may therefore act as a vapor barrier. Remember to consider this when choosing a treatment method.
Where do you use ProtoxAkvagrund2?
- Use on new and old untreated outdoor woodwork
- Can be used for wood protection on e.g. windows, doors, wooden decking, cladding, eaves, fascias, fences, carports and underlayments of plywood or other wood materials
- Can be used for sealing mold growth e.g. on roof structures, inside wall structures and under blocked floors
- Use on wood with a temperature above 5°C, relative humidity below 80 % and wood moisture below 18 %
Preparation
ProtoxAkvagrund2 is ready to use and must not be diluted further.
Reach capability is 4-6 m2 per liter, but it depends a lot on the absorbency of the wood. On new wood, the product can reach up to 8 m2 per liter.
The product must be stirred before use.
Ensure good ventilation during treatment and during the drying period.
Always read the safety data sheet before using the product.
Application
ProtoxAkvagrund2 can be applied by brush, spraying, dipping or application machine.
Avoid spilling the product on the ground or in waterways.
Always carry out the treatment on a paved surface or with a cover.
After treatment
Drying time is approximately 1-2 hours before the surface is touch dry and approximately 24 hours until it is ready for overcoating. Drying is best at a temperature of 20°C and a relative humidity of 60 %.
Clean tools and utensils with soap and water after use.
ProtoxAkvagrund2 has a shelf life of at least 2 years in unopened packaging and should be stored frost-free.
Empty packaging and leftovers can be thrown away with the household waste.
If wood treated with ProtoxAkvagrund2 is exposed to wind and weather, it must be protected with a surface treatment that must be continuously maintained according to the manufacturer's instructions. All water-based products for outdoor woodwork can be used.
Read also
Packaging sizes
5.0 liter plastic canister
CLP Classification
Harmful to aquatic life with long lasting effects.
"Biocides must be used responsibly. Always read the label and product information before use."
Few At a glance About our products
Our product catalog contains guides, descriptions and more.