ProtoxFugeRen is a set that has been developed to remove mold and discoloration on joints in window sills and in the bathroom.
The ProtoxFugeRen set consists of 2 products that each solve their part of the task:
- ProtoxHysan effectively removes the mould
- ProtoxFugeRen gel effectively whitens discolorations, also in depth
ProtoxFugeClean Set:
- Effectively removes mold with ProtoxHysan
- Also removes discolouration from mold with the ProtoxFugeRen gel
- Ready to use and easy to use
- Does not pollute the indoor climate according to the VOC indoor climate report
Use of the ProtoxFugeRen kit
What is ProtoxFugeRen?
ProtoxFugeRen is a specially developed set that effectively removes mold and discoloration caused by mold. The product is ready to use and easy to dose.
The set includes:
- ProtoxHysan (500 ml) ProtoxHysan is a special agent for cleaning and disinfecting mould.
- Nylon brush (1 pc)
- ProtoxFugeRen (250 ml) ProtoxFugeRen is a gel that removes discolouration in depth. ATTENTION! ProtoxFugeRen must not be used before prior treatment with ProtoxHysan.
- Grout pen (1 pc)
- Instructions for use
- Rubber gloves
- Spout for FugeRen bottle
Where do you use ProtoxFugeRen?
Used on rubber joints and hard joints where there is mold growth.
Used on rubber joints and hard joints where there is mold growth.
How do you use the ProtoxFugeren set
CLEANING OF JOINTS IN WINDOW FRAME
STEP 1
- If there is a lot of growth on the surface, it is advantageous to vacuum first with a vacuum cleaner with a pollen filter (hepa filter).
- Spray ProtoxHysan carefully on the joint and scrub with the nylon brush until all the mold is dislodged. Be careful not to brush the joint into pieces.
- Wipe away mold residue with a damp cloth.
- Let the surface dry.
STEP 2
After cleaning, there may still be discolouration that is deep in the joint. This can be removed with ProtoxFugeRen gel.
- Cover delicate surfaces or places where ProtoxFugeRen must not be applied.
- Attach the included spout to the FugeRen bottle
- Fill the grout pen with ProtoxFugeRen.
- Carefully apply the gel with the putty pen and leave on overnight.
- Rinse with lukewarm water or wipe with a damp cloth. Empty and clean the pen with clean water after use.
In case of extensive discolouration, repeat the treatment.
CLEANING OF JOINTS IN WINDOW FRAME
STEP 1
- If there is a lot of growth on the surface, it is advantageous to vacuum first with a vacuum cleaner with a pollen filter (hepa filter).
- Spray ProtoxHysan carefully on the joint and scrub with the nylon brush until all the mold is dislodged. Be careful not to brush the joint into pieces.
- Wipe away mold residue with a damp cloth.
- Let the surface dry.
STEP 2
After cleaning, there may still be discolouration that is deep in the joint. This can be removed with ProtoxFugeRen gel.
- Cover delicate surfaces or places where ProtoxFugeRen must not be applied.
- Attach the included spout to the FugeRen bottle
- Fill the grout pen with ProtoxFugeRen.
- Carefully apply the gel with the putty pen and leave on overnight.
- Rinse with lukewarm water or wipe with a damp cloth. Empty and clean the pen with clean water after use.
In case of extensive discolouration, repeat the treatment.
ATTENTION!
- Avoid dripping with ProtoxFugeRen on places you don't want it on, as it can bleach/discolor.
- Can damage natural stone and dark window sills.
- Always try in a less visible place.
- Cover with masking tape if necessary.
- Keep out of reach of children.
Also read
Packaging sizes
Set with 500 ml ProtoxHysan and 250 ml ProtoxFugeRen.
CLP Classification
Warning
Causes severe skin corrosion and eye damage.
Evolves toxic gas on contact with acid.
‘Use biocides safely. Always read the label and product information before use.’
Few overview about our products
Our product catalog contains guides and descriptions etc