ProtoxSvamp is a product that effectively prevents and fights wood-destroying fungi


  • Prevents and fights fungal attacks in wood, masonry and concrete
  • Can be used against fungi such as Real House Fungus, Yellow Wood Fungus, White Wood Fungus, Cork Hat and Pore Fungus
  • Has a preventive effect against mould
  • May only be used by professionals

The benefits of ProtoxSvamp

With ProtoxSvamp, you can fight ongoing attacks while preventing future attacks. This means that the customer gets his problem solved and is protected against further attacks by the same and other fungi.
ProtoxSvamp also acts preventively on new wood when you build new or replace something old. It provides the right pre-treatment so that you avoid the wood being attacked and broken down by wood-destroying fungi and molds in the future.

ProtoxSvamp has been tested and approved

ProtoxSvamp is approved by the Danish Environmental Protection Agency as a fungicide.

The product has also been tested and approved at international and recognized test institutes such as the State Forest Technology Research Station in Gembloux, Belgium and EMPA in St. Gallen, Switzerland. Here the product is tested according to the EN standards EN 113, EN 73 + EN 113 and EN 84 + EN 113.

ProtoxSvamp has MAL 00-1 and is specially tested and approved as a control agent against Real house fungus in masonry.

Danish approval number is 542-7.

Norwegian approval number is NO-2016-0114.

Swedish registration number is 5143 (Concentrate)

Use of ProtoxSvamp

What is ProtoxSvamp?

ProtoxSvamp is a wood preservative against attacks by wood-decomposing fungi such as Real house fungusYellow Log Fungus, White Wood Fungus, Cork Hat and Pore Fungus. The agent can be used on wood, masonry and concrete both indoors and outdoors. ProtoxSvamp prevents and fights wood-decomposing fungi and prevents mold. The product has a slight oily smell. The agent can be used in undiluted form as a primer for most surface products and applied by roller, brush, sprayer or by dipping.

Where do you use ProtoxSvamp?

  • Can be used both indoors and outdoors in use class 2 and 3. cf. DS/EN335-1.
  • Used on wood, masonry and concrete
  • Used on wood with a temperature above 5°C and a wood moisture content below 18 %


ProtoxSvamp is ready to use and must not be diluted further.

Consumption on woodwork is 0.50 liters per m² for combating treatment and 0.25 liters per m² for preventive treatment.

The consumption of masonry is 0.75 liters per m² for combating treatment and 0.50 liters per m² for preventive treatment.

The product must be stirred before use.

Always read the safety data sheet before using the product.


ProtoxSvamp can be applied with a brush, by spraying or by dipping. Due to the watery consistency, the product is suitable for spraying with ordinary spraying equipment. The agent does not require heating before spraying at low temperatures. Also read more about valve impregnation with ProtoxSvamp.


The drying time is approx. 8 hours at 20°C on porous surfaces.

Utensils and tools are cleaned with soap and water after use.

ProtoxSvamp is stable for at least 2 years in unopened packaging and must be stored frost-free.

Empty packaging and residues must be handed over to the municipal waste scheme for hazardous waste.

After finishing treatment outdoors, the surface should be treated with a pigmented (covering) and water-repellent surface product to protect the wood from degradation caused by the sun's UV rays and washing out by rain. The item must be completely dry before finishing. The finishing should be done within a month.

Treated surfaces glow bluish under a UV lamp ( UV Amber light 365 nm LED). This effect can be used to control treatment. The effect is most obvious in the dark and less obvious in daylight.

Also read

Packaging sizes

1.0 liter plastic can
2.5 liter plastic can
5.0 liter plastic can

CLP Classification


May harm fertility or the unborn child. Harmful to aquatic organisms, with long-lasting effects.

Contains propiconazole; (+)-1-[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-ylmethyl]-1H-1,2,4-triazole. May trigger an allergic reaction.

‘Use biocides safely. Always read the label and product information before use.’

Few overview about our products

Our product catalog contains guides and descriptions etc