ProtoxFugeRen is a kit designed to remove mold and discoloration from grout in windowsills and bathrooms.
The ProtoxFugeRen kit consists of 2 products that each do their part of the job:
- ProtoxHysan effectively removes mold
- ProtoxFugeRen gel effectively bleaches discolorations, even in depth
ProtoxFugeRen Set:
- Effectively removes mold with ProtoxHysan
- Also removes mold discoloration with ProtoxFugeRen gel
- Ready to use and easy to apply
- Does not affect the indoor climate according to VOC indoor climate report
Using the ProtoxFugeRen kit
What is ProtoxFugeRen?
ProtoxFugeRen is a specially developed kit that effectively removes mold and mold discoloration. The product is ready to use and easy to dose.
The kit contains:
- ProtoxHysan (500 ml) ProtoxHysan is a specialized agent for cleaning and disinfecting mold.
- Nylon brush (1 piece)
- ProtoxFugeRen (250 ml) ProtoxFugeRen is a gel that removes discoloration in depth. ATTENTION! ProtoxFugeRen must not be used before prior treatment with ProtoxHysan.
- Sealant pen (1 piece)
- Instructions for use
- Rubber gloves
- Spout for FugeRen bottle
Where do you use ProtoxFugeRen?
Use on rubber joints and hard joints where mold growth is present.
Use on rubber joints and hard joints where mold growth is present.
How to use the ProtoxFugeren kit
CLEANING GROUT IN WINDOW SILLS
STEP 1
- If there is a lot of growth on the surface, it is a good idea to vacuum first with a vacuum cleaner with a pollen filter (hepa filter).
- Spray ProtoxHysan gently on the joint and scrub with the nylon brush until all mold is loosened. Be careful not to brush the joint in pieces.
- Wipe away mold residue with a damp cloth.
- Let the surface dry.
STEP 2
After cleaning, there may still be discoloration deep in the joint. This can be removed with ProtoxFugeRen gel.
- Cover delicate surfaces or places where ProtoxFugeRen should not be applied.
- Attach the included spout to the FugeRen bottle
- Fill the joint pen with ProtoxFugeRen.
- Gently apply the gel with the caulking pen and leave overnight.
- Rinse with lukewarm water or wipe with a damp cloth. Empty and clean the pen with clean water after use.
In case of extensive discoloration, repeat the treatment.
CLEANING GROUT IN WINDOW SILLS
STEP 1
- If there is a lot of growth on the surface, it is a good idea to vacuum first with a vacuum cleaner with a pollen filter (hepa filter).
- Spray ProtoxHysan gently on the joint and scrub with the nylon brush until all mold is loosened. Be careful not to brush the joint in pieces.
- Wipe away mold residue with a damp cloth.
- Let the surface dry.
STEP 2
After cleaning, there may still be discoloration deep in the joint. This can be removed with ProtoxFugeRen gel.
- Cover delicate surfaces or places where ProtoxFugeRen should not be applied.
- Attach the included spout to the FugeRen bottle
- Fill the joint pen with ProtoxFugeRen.
- Gently apply the gel with the caulking pen and leave overnight.
- Rinse with lukewarm water or wipe with a damp cloth. Empty and clean the pen with clean water after use.
In case of extensive discoloration, repeat the treatment.
ATTENTION!
- Avoid dripping ProtoxFugeRen on areas you don't want it on, as it can bleach/discolor.
- Can damage natural stone and dark window sills.
- Always try in a less visible location.
- Cover with masking tape if necessary.
- Keep out of reach of children.
Read also
Packaging sizes
Set of 500 ml ProtoxHysan and 250 ml ProtoxFugeRen.
CLP Classification
Warning notice
Causes severe skin burns and eye damage.
Develops toxic gas on contact with acid.
"Biocides must be used responsibly. Always read the label and product information before use."
Few At a glance About our products
Our product catalog contains guides, descriptions and more.