ProClean - Test for proteins
ProClean is a test for egg whites or proteins. Because mold contains protein, the ProClean test can indicate whether mold (or other proteins) is present in the area tested. If the test is negative, you can be sure that there is no mold in the tested area.
Because the ProClean test is not specific to mold, it can give false positive results. These results can also show that there is bacterial growth, algae growth or other proteinaceous material. The ProClean test is therefore best as an indicative test and as a before-after test in connection with detected mold growth.
The test is widely used for self-monitoring in the food sector and can be carried out already 10-15 minutes after washing with ProtoxHysan.
The advantages of ProClean:
- Cheap
- Fast answer
- Does not require a laboratory or expensive equipment
- Can be used for self-checking after finishing work
- Can be used as a control of cleaning
Be aware:
ProClean is NOT a mold test, but a protein test. The test reacts to all forms of protein and therefore does not specifically test for mould. It is also not particularly sensitive to mold spores.
Storage
Store in a cool place (2-25°C), the expiry date can be seen from the print on the test pen.
You can also read about other measurement methods for mold in homes in our comparison of different analysis methods.
Storage
- Clear an area of 10 x 10 cm where you want to perform the test
- Pull the swab out of the case by removing the cover
- Mop the surface by rubbing the cotton swab on the surface in a criss-cross pattern repeatedly. If the swab becomes dirty, repeat the process from point 1
- Place the swab back into the case and secure the lid
- Break the pipette at the top and press the liquid down into the casing
- Shake gently
- The test gives a clear color reaction after 5 minutes, which must be read within 10 minutes of performing the test.
The ProClean test gives a distinct violet color reaction if foreign egg white substances (protein) are present in the test area. If the area has been cleaned well enough, the test shows a clear, light green colour.
ATTENTION! It is important that the area is rinsed/dried thoroughly prior to the test, so that dead particles are removed as much as possible. These cannot be measured with ProClean.
Also watch this instructional video on how to use the ProClean test.
Few overview about our products
Our product catalog contains guides and descriptions etc